ixgbe驱动初始化

http://abcdxyzk.github.io/blog/2020/05/21/ixgbe-init/

 

 

首先模块加载insmod ixgbe.ko

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21

module_init(ixgbe_init_module);

module_init(ixgbe_init_module);
{
	int ret;
	pr_info("%s - version %s\n", ixgbe_driver_string, ixgbe_driver_version);
	pr_info("%s\n", ixgbe_copyright);

	ixgbe_dbg_init();
 　　　　ret = pci_register_driver(&ixgbe_driver);
	if (ret) {
		ixgbe_dbg_exit();
		return ret;
	}

#ifdef CONFIG_IXGBE_DCA
	dca_register_notify(&dca_notifier);
#endif

	return 0;
}

于是看pci设备的核心结构体

1
2
3
4
5
6
7
8
9
10
11
12
13

static struct pci_driver ixgbe_driver = {
	.name     = ixgbe_driver_name,
	.id_table = ixgbe_pci_tbl,
	.probe    = ixgbe_probe,
	.remove   = ixgbe_remove,
#ifdef CONFIG_PM
	.suspend  = ixgbe_suspend,
	.resume   = ixgbe_resume,
#endif
	.shutdown = ixgbe_shutdown,
	.sriov_configure = ixgbe_pci_sriov_configure,
	.err_handler = &ixgbe_err_handler
};

当设备加载成功后，会执行ixgbe_probe函数

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24

static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
	/*分配struct net_device *netdev 结构体*/
	netdev = alloc_etherdev_mq(sizeof(struct ixgbe_adapter), indices);

	if (!netdev) {
		err = -ENOMEM;
		goto err_alloc_etherdev;
	}

	SET_NETDEV_DEV(netdev, &pdev->dev);

	/*分配struct ixgbe_adapter *adapter结构体*/
	adapter = netdev_priv(netdev);

	/*分配dev结构体的ops函数指针集合*/
	netdev->netdev_ops = &ixgbe_netdev_ops;

	err = ixgbe_sw_init(adapter);

	err = ixgbe_init_interrupt_scheme(adapter);
	/*设备注册完毕*/<br>
	err = register_netdev(netdev);
}

重点看ixgbe_init_interrupt_scheme(adapter)函数，该函数里面会初始化adapter结构体以及napi相关的东西

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43

int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
{

	err = ixgbe_alloc_q_vectors(adapter);

}
static int ixgbe_alloc_q_vectors(struct ixgbe_adapter *adapter)
{

	if (q_vectors >= (rxr_remaining + txr_remaining)) {
		for (; rxr_remaining; v_idx++) {
			err = ixgbe_alloc_q_vector(adapter, q_vectors, v_idx,
						   0, 0, 1, rxr_idx);

			if (err)
				goto err_out;

			/* update counts and index */
			rxr_remaining--;
			rxr_idx++;
		}
	}
}
static int ixgbe_alloc_q_vector(struct ixgbe_adapter *adapter,
				int v_count, int v_idx,
				int txr_count, int txr_idx,
				int rxr_count, int rxr_idx)
{
	/* setup affinity mask and node */
	if (cpu != -1)
		cpumask_set_cpu(cpu, &q_vector->affinity_mask);
	q_vector->numa_node = node;

#ifdef CONFIG_IXGBE_DCA
	/* initialize CPU for DCA */
	q_vector->cpu = -1;

#endif
	/* initialize NAPI */
	netif_napi_add(adapter->netdev, &q_vector->napi,
			   ixgbe_poll, 64);
	napi_hash_add(&q_vector->napi);
}

到此为止，网卡设置初始化完毕　　

其中涉及到如下几个结构体

ixgbe_adapter
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60

/* board specific private data structure */
struct ixgbe_adapter {

	//发送的rings
	struct ixgbe_ring *tx_ring[MAX_TX_QUEUES] ____cacheline_aligned_in_smp;

	//接收的rings
	struct ixgbe_ring *rx_ring[MAX_RX_QUEUES];

	//这个vector里面包含了napi结构
	//应该是跟下面的entries一一对应起来做为是一个中断向量的东西吧
	struct ixgbe_q_vector *q_vector[MAX_Q_VECTORS];

	//这个里面估计是MSIX的多个中断对应的响应接口
	struct msix_entry *msix_entries;
}

struct ixgbe_q_vector {
	struct ixgbe_adapter *adapter;
ifdef CONFIG_IXGBE_DCA
	int cpu;            /* CPU for DCA */
#endif
	u16 v_idx;              /* index of q_vector within array, also used for
				 * finding the bit in EICR and friends that
				 * represents the vector for this ring */
	u16 itr;                /* Interrupt throttle rate written to EITR */
	struct ixgbe_ring_container rx, tx;

	struct napi_struct napi;/*napi结构体*/
	cpumask_t affinity_mask;
	int numa_node;
	struct rcu_head rcu;    /* to avoid race with update stats on free */
	char name[IFNAMSIZ + 9];

	/* for dynamic allocation of rings associated with this q_vector */
	struct ixgbe_ring ring[0] ____cacheline_internodealigned_in_smp;
};

struct napi_struct {
	/* The poll_list must only be managed by the entity which
	 * changes the state of the NAPI_STATE_SCHED bit.  This means
	 * whoever atomically sets that bit can add this napi_struct
	 * to the per-cpu poll_list, and whoever clears that bit
	 * can remove from the list right before clearing the bit.
	 */
	struct list_head    poll_list;

	unsigned long       state;
	int         weight;
	unsigned int        gro_count;
	int         (*poll)(struct napi_struct *, int);//poll的接口实现
#ifdef CONFIG_NETPOLL
	spinlock_t      poll_lock;
	int         poll_owner;
#endif
	struct net_device   *dev;
	struct sk_buff      *gro_list;
	struct sk_buff      *skb;
	struct list_head    dev_list;
};

然后当我们ifconfig dev up 时，会执行dev_ops->open函数

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43

static int ixgbe_open(struct net_device *netdev)
{
	/* allocate transmit descriptors */
	err = ixgbe_setup_all_tx_resources(adapter);
	if (err)
		goto err_setup_tx;

	/* allocate receive descriptors */
	err = ixgbe_setup_all_rx_resources(adapter);
	/*注册中断*/
	err = ixgbe_request_irq(adapter);
}

static int ixgbe_request_irq(struct ixgbe_adapter *adapter)
{
	struct net_device *netdev = adapter->netdev;
	int err;

	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED)
		err = ixgbe_request_msix_irqs(adapter);
	else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED)
		err = request_irq(adapter->pdev->irq, ixgbe_intr, 0,
				  netdev->name, adapter);
	else
		err = request_irq(adapter->pdev->irq, ixgbe_intr, IRQF_SHARED,
				  netdev->name, adapter);

	if (err)
		e_err(probe, "request_irq failed, Error %d\n", err);

	return err;
}

static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter)
{
	for (vector = 0; vector < adapter->num_q_vectors; vector++) {
		struct ixgbe_q_vector *q_vector = adapter->q_vector[vector];
		struct msix_entry *entry = &adapter->msix_entries[vector];

		err = request_irq(entry->vector, &ixgbe_msix_clean_rings, 0,
				  q_vector->name, q_vector);
	}
}

从上面的代码流程可以看出，最终注册的中断处理函数为ixgbe_msix_clean_rings

1
2
3
4
5
6
7
8
9
10
11

static irqreturn_t ixgbe_msix_clean_rings(int irq, void *data)
{
	struct ixgbe_q_vector *q_vector = data;

	/* EIAM disabled interrupts (on this vector) for us */

	if (q_vector->rx.ring || q_vector->tx.ring)
		napi_schedule(&q_vector->napi);

	return IRQ_HANDLED;
}

从上述代码中可以看，该中断处理函数仅仅作为napi的调度者

当数据包到来时，首先唤醒硬中断执行ixgbe_msix_clean_rings函数，最终napi_schedule会调用 __raise_softirq_irqoff 去触发一个软中断NET_RX_SOFTIRQ，然后又对应的软中断接口去实现往上的协议栈逻辑

然后看看napi 调度函数都做了些什么工作

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42

static inline void napi_schedule(struct napi_struct *n)
{
	if (napi_schedule_prep(n))
		__napi_schedule(n);
}
void __napi_schedule(struct napi_struct *n)
{
	unsigned long flags;

	local_irq_save(flags);
	____napi_schedule(this_cpu_ptr(&softnet_data), n);
	local_irq_restore(flags);
}

最终可以看出napi调度函数把napi结构体挂到了per cpu的私有数据结构softnet_data上
struct softnet_data {
	struct Qdisc        *output_queue;
	struct Qdisc        **output_queue_tailp;
	struct list_head    poll_list;
	struct sk_buff      *completion_queue;
	struct sk_buff_head process_queue;

	/* stats */
	unsigned int        processed;
	unsigned int        time_squeeze;
	unsigned int        cpu_collision;
	unsigned int        received_rps;

#ifdef CONFIG_RPS
	struct softnet_data *rps_ipi_list;

	/* Elements below can be accessed between CPUs for RPS */
	struct call_single_data csd ____cacheline_aligned_in_smp;
	struct softnet_data *rps_ipi_next;
	unsigned int        cpu;
	unsigned int        input_queue_head;
	unsigned int        input_queue_tail;
#endif
	unsigned int        dropped;
	struct sk_buff_head input_pkt_queue;
	struct napi_struct  backlog;/*napi结构体里面的双向链表中*/
};

NET_RX_SOFTIRQ是收到数据包的软中断信号对应的接口是net_rx_action

NET_TX_SOFTIRQ是发送完数据包后的软中断信号对应的接口是net_tx_action　　

1
2
3
4
5
6
7
8
9
10
11
12
13
14

static void net_rx_action(struct softirq_action *h)
{
	/* 获取每个cpu的数据*/
	struct softnet_data *sd = this_cpu_ptr(&softnet_data);
	while (!list_empty(&sd->poll_list)) {
		struct napi_struct *n;
				n = list_first_entry(&sd->poll_list, struct napi_struct, poll_list);

		if (test_bit(NAPI_STATE_SCHED, &n->state)) {
			work = n->poll(n, weight);
			trace_napi_poll(n);
		}
	}
}

于是就执行到初始化napi结构体中的poll函数，在这里为ixgbe_poll

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90

int ixgbe_poll(struct napi_struct *napi, int budget)
{
	struct ixgbe_q_vector *q_vector =
				container_of(napi, struct ixgbe_q_vector, napi);
	struct ixgbe_adapter *adapter = q_vector->adapter;
	struct ixgbe_ring *ring;
	int per_ring_budget;
	bool clean_complete = true;

#ifdef CONFIG_IXGBE_DCA
	if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
		ixgbe_update_dca(q_vector);
#endif

	ixgbe_for_each_ring(ring, q_vector->tx)
		clean_complete &= !!ixgbe_clean_tx_irq(q_vector, ring);

	if (!ixgbe_qv_lock_napi(q_vector))
		return budget;

	/* attempt to distribute budget to each queue fairly, but don't allow
	 * the budget to go below 1 because we'll exit polling */
	if (q_vector->rx.count > 1)
		per_ring_budget = max(budget/q_vector->rx.count, 1);
	else
		per_ring_budget = budget;

	ixgbe_for_each_ring(ring, q_vector->rx)
		clean_complete &= (ixgbe_clean_rx_irq(q_vector, ring,
				   per_ring_budget) < per_ring_budget);

	ixgbe_qv_unlock_napi(q_vector);
	/* If all work not completed, return budget and keep polling */
	if (!clean_complete)
		return budget;

	/* all work done, exit the polling mode */
	napi_complete(napi);
	if (adapter->rx_itr_setting & 1)
		ixgbe_set_itr(q_vector);
	if (!test_bit(__IXGBE_DOWN, &adapter->state))
		ixgbe_irq_enable_queues(adapter, ((u64)1 << q_vector->v_idx));

	return 0;
}

static int ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
				   struct ixgbe_ring *rx_ring,
				   const int budget)
{
	   ixgbe_rx_skb(q_vector, skb);
}

static void ixgbe_rx_skb(struct ixgbe_q_vector *q_vector,
			 struct sk_buff *skb)
{
	if (ixgbe_qv_busy_polling(q_vector))
		netif_receive_skb(skb);
	else
		napi_gro_receive(&q_vector->napi, skb);
}

int netif_receive_skb(struct sk_buff *skb)
{
	int ret;

	net_timestamp_check(netdev_tstamp_prequeue, skb);

	if (skb_defer_rx_timestamp(skb))
		return NET_RX_SUCCESS;

	rcu_read_lock();

#ifdef CONFIG_RPS
	if (static_key_false(&rps_needed)) {
		struct rps_dev_flow voidflow, *rflow = &voidflow;
		int cpu = get_rps_cpu(skb->dev, skb, &rflow);

		if (cpu >= 0) {
			ret = enqueue_to_backlog(skb, cpu, &rflow->last_qtail);
			rcu_read_unlock();
			return ret;
		}
	}
#endif
		/*最终协议栈开始收报*/
	ret = __netif_receive_skb(skb);
	rcu_read_unlock();
	return ret;
}

相关文章：

  • 2021-12-29
  • 2022-12-23
  • 2021-09-27
  • 2022-12-23
  • 2022-12-23
  • 2022-12-23
  • 2021-12-05
猜你喜欢
  • 2021-12-05
  • 2022-12-23
  • 2021-07-05
  • 2022-12-23
  • 2022-12-23
  • 2021-12-02
  • 2022-02-21
相关资源
相似解决方案
热门标签
Java Python linux javascript Mysql C# Docker 算法 前端 SpringBoot Redis Vue spring 设计模式 .net core .net kubernetes c++ 数据库 数据结构 大数据 js 机器学习 微服务 Android Go 程序员 面试 JVM ASP.net core 云原生 人工智能 后端 PHP git CSS golang k8s Nginx Django mybatis 深度学习 多线程 React 架构 devops 爬虫 云计算 Spring Boot LeetCode