matlab中的3d图形数据并更改轴值

Question

我正在尝试制作 343 x 81 个单元格的 3d excel 文件图，第一列需要是 X，第一行需要是 Y，剩下的矩阵需要是 Z。我从excel成功导入数据，我创建了一个名为能量（343,1）（x轴）的第一列矩阵，同时创建了一个名为Time Delay（y轴）的行矩阵（1, 81）和一个（ 343,81) 矩阵，其中第一列和第一行为零，称为吸光度变化（Z 轴）。我有我需要的正确 3d 图，但我需要图中显示的轴是能量和时间延迟的轴，而不是吸光度变化矩阵的索引。我将代码的相关部分以及图表的图片放在下面：

EnergyString = dataArray{:, 1};
EnergyString(1,1) = {'0'};
Energy = str2double(EnergyString);
%Energy = [ Energy, zeros(343, 80) ];

TimeDelay = [ z1(1,1), z2(1,1), z3(1,1), z4(1,1), z5(1,1), z6(1,1), z7(1,1), z8(1,1), z9(1,1), z10(1,1), z11(1,1), z12(1,1), z13(1,1), z14(1,1), z15(1,1), z16(1,1), z17(1,1), z18(1,1), z19(1,1), z20(1,1), z21(1,1), z22(1,1), z23(1,1), z24(1,1), z25(1,1), z26(1,1), z27(1,1), z28(1,1), z29(1,1), z30(1,1), z31(1,1), z32(1,1), z33(1,1), z34(1,1), z35(1,1), z36(1,1), z37(1,1), z38(1,1), z39(1,1), z40(1,1), z41(1,1), z42(1,1), z42(1,1), z43(1,1), z44(1,1), z45(1,1), z46(1,1), z47(1,1), z48(1,1), z49(1,1), z50(1,1), z51(1,1), z52(1,1), z53(1,1), z54(1,1), z55(1,1), z56(1,1), z57(1,1), z58(1,1), z59(1,1), z60(1,1), z61(1,1), z62(1,1), z63(1,1), z64(1,1), z65(1,1), z66(1,1), z67(1,1), z68(1,1), z69(1,1), z70(1,1), z71(1,1), z72(1,1), z73(1,1), z74(1,1), z75(1,1), z76(1,1), z77(1,1), z78(1,1), z79(1,1), z80(1,1) ];
%TimeDelay = [ TimeDelay; zeros(342, 81)];

startRow formatSpec filename fileID delimiter ans EnergyString Alpha Beta Gamma Delta Epsilon Zeta Eta Theta Iota Kappa Lambda Mu Nu Xi Omicron Pi Rho Sigma Tau Upsilon Phi Chi Psi Omega AlphaAlpha AlphaBeta AlphaGamma AlphaDelta AlphaEpsilon AlphaZeta AlphaEta AlphaTheta AlphaIota AlphaKappa AlphaLambda AlphaMu AlphaNu AlphaXi AlphaOmicron AlphaPi AlphaRho AlphaSigma AlphaTau AlphaUpsilon AlphaPhi AlphaChi AlphaPsi AlphaOmega BetaAlpha BetaBeta BetaGamma BetaDelta BetaEpsilon BetaZeta BetaEta BetaTheta BetaIota BetaKappa BetaLambda BetaMu BetaNu BetaXi BetaOmicron BetaPi BetaRho BetaSigma BetaTau BetaUpsilon BetaPhi BetaChi BetaPsi BetaOmega GammaAlpha GammaBeta GammaGamma GammaDelta GammaEpsilon GammaZeta GammaEta GammaTheta; %Delete Excess Varaible

AbsorbanceChange = [ zeros(343, 1), z1, z2, z3, z4, z5, z6, z7, z8, z9, z10, z11, z12, z13, z14, z15, z16, z17, z18, z19, z20, z21, z22, z23, z24, z25, z26, z27, z28, z29, z30, z31, z32, z33, z34, z35, z36, z37, z38, z39, z40, z41, z42, z43, z44, z45, z46, z47, z48, z49, z50, z51, z52, z53, z54, z55, z56, z57, z58, z59, z60, z61, z62, z63, z64, z65, z66, z67, z68, z69, z70, z71, z72, z73, z74, z75, z76, z77, z78, z79, z80];
AbsorbanceChange(1,:) = 0;
clear  z1 z2 z3 z4 z5 z6 z7 z8 z9 z10 z11 z12 z13 z14 z15 z16 z17 z18 z19 z20 z21 z22 z23 z24 z25 z26 z27 z28 z29 z30 z31 z32 z33 z34 z35 z36 z37 z38 z39 z40 z41 z42 z43 z44 z45 z46 z47 z48 z49 z50 z51 z52 z53 z54 z55 z56 z57 z58 z59 z60 z61 z62 z63 z64 z65 z66 z67 z68 z69 z70  z71 z72 z73 z74 z75 z76 z77 z78 z79 z80; 


mesh(AbsorbanceChange) 
colorbar


title('WS2-Perovskite-image')
xlabel('Energy') % x-axis label
ylabel('Time-delay') % y-axis label
zlabel('Absorbance Change')

Answer 1

当我在 MATLAB 中输入 help mesh 时，我看到了以下内容：

mesh(x,y,Z) and mesh(x,y,Z,C), with two vector arguments replacing
the first two matrix arguments, must have length(x) = n and
length(y) = m where [m,n] = size(Z).  In this case, the vertices
of the mesh lines are the triples (x(j), y(i), Z(i,j)).
Note that x corresponds to the columns of Z and y corresponds to
the rows.

这样就可以了

mesh(Energy, TimeDelay, AbsorbanceChange);

---

我不知道你怎么read the data from file，但有比在代码中单独指定每个单元格更好的方法。