【发布时间】：2018-04-25 17:36:25
【问题描述】：
我正在尝试使用我使用 mkimage 命令创建的 uImage 文件来启动 beaglebone black。有一个 emmc to sd image flasher package 在线可用，其中包含一个 uImage 以及其他所需文件 (https://elinux.org/BeagleBone_Black_Extracting_eMMC_contents)，我关注了这个网站并创建了一个我使用 mkimage 实用程序制作的 uImage 闪存卡。
从具有该 uImage 的 SD 卡启动时出现以下错误：
U-Boot SPL 2016.01-00763-g3faf221 (Jan 29 2016 - 20:47:08)
Trying to boot from MMC
Card doesn't support part_switch
MMC partition switch failed
*** Warning - MMC partition switch failed, using default environment
reading u-boot.img
reading u-boot.img
U-Boot 2016.01-00763-g3faf221 (Jan 29 2016 - 20:47:08 +0000)
Watchdog enabled
I2C: ready
DRAM: 512 MiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
*** Warning - bad CRC, using default environment
Net: <ethaddr> not set. Validating first E-fuse MAC
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
=> set sdboot 1
=> boot
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
reading boot.scr
** Unable to read file boot.scr **
reading uEnv.txt
235 bytes read in 5 ms (45.9 KiB/s)
Loaded environment from uEnv.txt
Importing environment from mmc ...
Running uenvcmd ...
reading uImage
5497536 bytes read in 302 ms (17.4 MiB/s)
reading /am335x-boneblack.dtb
25926 bytes read in 8 ms (3.1 MiB/s)
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux kernel
Created: 2015-09-07 21:47:16 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 5497472 Bytes = 5.2 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 81ff0000
Booting using the fdt blob at 0x81ff0000
Loading Kernel Image ... OK
Loading Device Tree to 8fff6000, end 8ffff545 ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.177572] omap2_mbox_probe: platform not supported
[ 0.333923] tps65217-bl tps65217-bl: no platform data provided
[ 0.397544] bone-capemgr bone_capemgr.9: slot #0: No cape found
[ 0.434652] bone-capemgr bone_capemgr.9: slot #1: No cape found
[ 0.471760] bone-capemgr bone_capemgr.9: slot #2: No cape found
[ 0.508869] bone-capemgr bone_capemgr.9: slot #3: No cape found
[ 0.528815] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset' failed
[ 0.591166] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.8
[ 0.602845] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22
[ 0.610128] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
[ 0.686675] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 0.695344] [<c0010f5d>] (unwind_backtrace+0x1/0x98) from [<c04994c3>] (panic+0x5b/0x158)
[ 0.703882] [<c04994c3>] (panic+0x5b/0x158) from [<c07bc94b>] (mount_block_root+0xf7/0x178)
[ 0.712595] [<c07bc94b>] (mount_block_root+0xf7/0x178) from [<c07bcb09>] (mount_root+0x95/0xb0)
[ 0.721676] [<c07bcb09>] (mount_root+0x95/0xb0) from [<c07bcbef>] (prepare_namespace+0xcb/0x11c)
[ 0.730836] [<c07bcbef>] (prepare_namespace+0xcb/0x11c) from [<c0495aff>] (kernel_init+0x7/0x98)
[ 0.740007] [<c0495aff>] (kernel_init+0x7/0x98) from [<c000c7fd>] (ret_from_fork+0x11/0x34)
任何帮助都会很有用。
【问题讨论】：
标签： linux-kernel beagleboneblack u-boot