Matplotlib 轴具有两个比例共享原点

Question

我需要两个在 Matplotlib 中覆盖两个具有不同 Y 轴刻度的数据集。数据包含正值和负值。我希望两个轴共享一个原点，但 Matplotlib 默认情况下不对齐两个刻度。

import numpy as np
import matplotlib.pyplot as plt

fig = plt.figure()
ax1 = fig.add_subplot(111)
ax2 = ax1.twinx()

ax1.bar(range(6), (2, -2, 1, 0, 0, 0))
ax2.plot(range(6), (0, 2, 8, -2, 0, 0))
plt.show()

我想可以使用.get_ylim() 和.set_ylim() 执行一些计算，两个对齐两个比例。有更简单的解决方案吗？

Answer 1

这可能不是您想要的，但这帮助我将整数排列在两个不同的垂直轴上：

ax1.set_ylim(0,4000)
ax2.set_ylim(0,120)
ax2.set_yticks(np.linspace(ax2.get_yticks()[0], ax2.get_yticks()[-1], len(ax1.get_yticks())))

Answer 2

我需要对齐两个子图，但不需要对齐它们的零点。其他解决方案对我来说不太奏效。

我的程序的主要代码如下所示。子图未对齐。此外，我只更改 align_yaxis 函数并保持所有其他代码相同。

import matplotlib.pyplot as plt

def align_yaxis(ax1, v1, ax2, v2):
  return 0

x  = range(10)
y1 = [3.2, 1.3, -0.3, 0.4, 2.3, -0.9, 0.2, 0.1, 1.3, -3.4]
y2, s = [], 100
for i in y1:
    s *= 1 + i/100
    y2.append(s)

fig = plt.figure()
ax1 = fig.add_subplot()
ax2 = ax1.twinx()

ax1.axhline(y=0, color='k', linestyle='-', linewidth=0.5)
ax1.bar(x, y1, color='tab:blue')
ax2.plot(x, y2, color='tab:red')

fig.tight_layout()
align_yaxis(ax1, 0, ax2, 100)
plt.show()

Picture of not aligned subplots

使用@HYRY 的解决方案，我得到了对齐的子图，但第二个子图不在图中。你看不到它。

def align_yaxis(ax1, v1, ax2, v2):
    """adjust ax2 ylimit so that v2 in ax2 is aligned to v1 in ax1"""
    _, y1 = ax1.transData.transform((0, v1))
    _, y2 = ax2.transData.transform((0, v2))
    inv = ax2.transData.inverted()
    _, dy = inv.transform((0, 0)) - inv.transform((0, y1-y2))
    miny, maxy = ax2.get_ylim()
    ax2.set_ylim(miny+dy, maxy+dy)

Picture without second subplot

使用@drevicko 的解决方案，我也得到了对齐的情节。但是现在第一个子图已经不存在了，第一个 Y 轴很奇怪。

def align_yaxis(ax1, v1, ax2, v2):
    """adjust ax2 ylimit so that v2 in ax2 is aligned to v1 in ax1"""
    _, y1 = ax1.transData.transform((0, v1))
    _, y2 = ax2.transData.transform((0, v2))
    adjust_yaxis(ax2,(y1-y2)/2,v2)
    adjust_yaxis(ax1,(y2-y1)/2,v1)

def adjust_yaxis(ax,ydif,v):
    """shift axis ax by ydiff, maintaining point v at the same location"""
    inv = ax.transData.inverted()
    _, dy = inv.transform((0, 0)) - inv.transform((0, ydif))
    miny, maxy = ax.get_ylim()
    miny, maxy = miny - v, maxy - v
    if -miny>maxy or (-miny==maxy and dy > 0):
        nminy = miny
        nmaxy = miny*(maxy+dy)/(miny+dy)
    else:
        nmaxy = maxy
        nminy = maxy*(miny+dy)/(maxy+dy)
    ax.set_ylim(nminy+v, nmaxy+v)

Picture without firstsubplot

所以我稍微调整了@drevicko 的解决方案，得到了我想要的。

def align_yaxis(ax1, v1, ax2, v2):
    """adjust ax2 ylimit so that v2 in ax2 is aligned to v1 in ax1"""
    _, y1 = ax1.transData.transform((0, v1))
    _, y2 = ax2.transData.transform((0, v2))
    adjust_yaxis(ax1,(y2 - y1)/2,v1)
    adjust_yaxis(ax2,(y1 - y2)/2,v2)

def adjust_yaxis(ax,ydif,v):
    """shift axis ax by ydiff, maintaining point v at the same location"""
    inv = ax.transData.inverted()
    _, dy = inv.transform((0, 0)) - inv.transform((0, ydif))
    miny, maxy = ax.get_ylim()

    nminy = miny - v + dy - abs(dy)
    nmaxy = maxy - v + dy + abs(dy)
    ax.set_ylim(nminy+v, nmaxy+v)

Subplots as I've expected them to look

Answer 3

@Tim 的解决方案适用于两个以上的轴：

import numpy as np

def align_yaxis(axes): 
    y_lims = np.array([ax.get_ylim() for ax in axes])

    # force 0 to appear on all axes, comment if don't need
    y_lims[:, 0] = y_lims[:, 0].clip(None, 0)
    y_lims[:, 1] = y_lims[:, 1].clip(0, None)

    # normalize all axes
    y_mags = (y_lims[:,1] - y_lims[:,0]).reshape(len(y_lims),1)
    y_lims_normalized = y_lims / y_mags

    # find combined range
    y_new_lims_normalized = np.array([np.min(y_lims_normalized), np.max(y_lims_normalized)])

    # denormalize combined range to get new axes
    new_lims = y_new_lims_normalized * y_mags
    for i, ax in enumerate(axes):
        ax.set_ylim(new_lims[i])    

Answer 4

我已经从上面编写了一个解决方案，它将对齐任意数量的轴：

def align_yaxis_np(axes):
    """Align zeros of the two axes, zooming them out by same ratio"""
    axes = np.array(axes)
    extrema = np.array([ax.get_ylim() for ax in axes])

    # reset for divide by zero issues
    for i in range(len(extrema)):
        if np.isclose(extrema[i, 0], 0.0):
            extrema[i, 0] = -1
        if np.isclose(extrema[i, 1], 0.0):
            extrema[i, 1] = 1

    # upper and lower limits
    lowers = extrema[:, 0]
    uppers = extrema[:, 1]

    # if all pos or all neg, don't scale
    all_positive = False
    all_negative = False
    if lowers.min() > 0.0:
        all_positive = True

    if uppers.max() < 0.0:
        all_negative = True

    if all_negative or all_positive:
        # don't scale
        return

    # pick "most centered" axis
    res = abs(uppers+lowers)
    min_index = np.argmin(res)

    # scale positive or negative part
    multiplier1 = abs(uppers[min_index]/lowers[min_index])
    multiplier2 = abs(lowers[min_index]/uppers[min_index])

    for i in range(len(extrema)):
        # scale positive or negative part based on which induces valid
        if i != min_index:
            lower_change = extrema[i, 1] * -1*multiplier2
            upper_change = extrema[i, 0] * -1*multiplier1
            if upper_change < extrema[i, 1]:
                extrema[i, 0] = lower_change
            else:
                extrema[i, 1] = upper_change

        # bump by 10% for a margin
        extrema[i, 0] *= 1.1
        extrema[i, 1] *= 1.1

    # set axes limits
    [axes[i].set_ylim(*extrema[i]) for i in range(len(extrema))]

4 个随机序列的示例（您可以在 4 组单独的 y 轴标签上看到离散范围）：

Answer 5

这里的其他答案似乎过于复杂，不一定适用于所有场景（例如 ax1 全部为负，ax2 全部为正）。有两种简单的方法总是有效的：

1. 始终在两个 y 轴的图表中间放置 0
2. 有点花哨，有点保留正负比，见下文

def align_yaxis(ax1, ax2):
    y_lims = numpy.array([ax.get_ylim() for ax in [ax1, ax2]])

    # force 0 to appear on both axes, comment if don't need
    y_lims[:, 0] = y_lims[:, 0].clip(None, 0)
    y_lims[:, 1] = y_lims[:, 1].clip(0, None)

    # normalize both axes
    y_mags = (y_lims[:,1] - y_lims[:,0]).reshape(len(y_lims),1)
    y_lims_normalized = y_lims / y_mags

    # find combined range
    y_new_lims_normalized = numpy.array([numpy.min(y_lims_normalized), numpy.max(y_lims_normalized)])

    # denormalize combined range to get new axes
    new_lim1, new_lim2 = y_new_lims_normalized * y_mags
    ax1.set_ylim(new_lim1)
    ax2.set_ylim(new_lim2)

Answer 6

在绘制以下两个点序列时，@drevicko 的回答对我来说失败了：

l1 = [0.03, -0.6, 1, 0.05]
l2 = [0.8,  0.9,  1,  1.1]
fig, ax1 = plt.subplots()
ax1.plot(l1)
ax2 = ax1.twinx()
ax2.plot(l2, color='r')
align_yaxis(ax1, 0, ax2, 0)

...所以这是我的版本：

def align_yaxis(ax1, ax2):
    """Align zeros of the two axes, zooming them out by same ratio"""
    axes = (ax1, ax2)
    extrema = [ax.get_ylim() for ax in axes]
    tops = [extr[1] / (extr[1] - extr[0]) for extr in extrema]
    # Ensure that plots (intervals) are ordered bottom to top:
    if tops[0] > tops[1]:
        axes, extrema, tops = [list(reversed(l)) for l in (axes, extrema, tops)]

    # How much would the plot overflow if we kept current zoom levels?
    tot_span = tops[1] + 1 - tops[0]

    b_new_t = extrema[0][0] + tot_span * (extrema[0][1] - extrema[0][0])
    t_new_b = extrema[1][1] - tot_span * (extrema[1][1] - extrema[1][0])
    axes[0].set_ylim(extrema[0][0], b_new_t)
    axes[1].set_ylim(t_new_b, extrema[1][1])

原则上，对齐零（或其他提供的解决方案接受的其他值）有无限不同的可能性：无论您在 y 轴上放置零的任何位置，都可以缩放两个系列中的每一个以使其适合。我们只是选择这样的位置，使得在变换之后，两者覆盖相同高度的垂直间隔。 或者换句话说，与非对齐图相比，我们将它们最小化为相同的因子。 （这不意味着 0 位于图的一半：例如，如果一个图全为负数而另一个全为正数，则会发生这种情况。）

Numpy 版本：

def align_yaxis_np(ax1, ax2):
    """Align zeros of the two axes, zooming them out by same ratio"""
    axes = np.array([ax1, ax2])
    extrema = np.array([ax.get_ylim() for ax in axes])
    tops = extrema[:,1] / (extrema[:,1] - extrema[:,0])
    # Ensure that plots (intervals) are ordered bottom to top:
    if tops[0] > tops[1]:
        axes, extrema, tops = [a[::-1] for a in (axes, extrema, tops)]

    # How much would the plot overflow if we kept current zoom levels?
    tot_span = tops[1] + 1 - tops[0]

    extrema[0,1] = extrema[0,0] + tot_span * (extrema[0,1] - extrema[0,0])
    extrema[1,0] = extrema[1,1] + tot_span * (extrema[1,0] - extrema[1,1])
    [axes[i].set_ylim(*extrema[i]) for i in range(2)]

Answer 7

为了确保保持 y 边界（因此没有数据点被移出绘图），并平衡两个 y 轴的调整，我对@HYRY 的回答做了一些补充：

def align_yaxis(ax1, v1, ax2, v2):
    """adjust ax2 ylimit so that v2 in ax2 is aligned to v1 in ax1"""
    _, y1 = ax1.transData.transform((0, v1))
    _, y2 = ax2.transData.transform((0, v2))
    adjust_yaxis(ax2,(y1-y2)/2,v2)
    adjust_yaxis(ax1,(y2-y1)/2,v1)

def adjust_yaxis(ax,ydif,v):
    """shift axis ax by ydiff, maintaining point v at the same location"""
    inv = ax.transData.inverted()
    _, dy = inv.transform((0, 0)) - inv.transform((0, ydif))
    miny, maxy = ax.get_ylim()
    miny, maxy = miny - v, maxy - v
    if -miny>maxy or (-miny==maxy and dy > 0):
        nminy = miny
        nmaxy = miny*(maxy+dy)/(miny+dy)
    else:
        nmaxy = maxy
        nminy = maxy*(miny+dy)/(maxy+dy)
    ax.set_ylim(nminy+v, nmaxy+v)

Answer 8

使用 align_yaxis() 函数：

import numpy as np
import matplotlib.pyplot as plt

def align_yaxis(ax1, v1, ax2, v2):
    """adjust ax2 ylimit so that v2 in ax2 is aligned to v1 in ax1"""
    _, y1 = ax1.transData.transform((0, v1))
    _, y2 = ax2.transData.transform((0, v2))
    inv = ax2.transData.inverted()
    _, dy = inv.transform((0, 0)) - inv.transform((0, y1-y2))
    miny, maxy = ax2.get_ylim()
    ax2.set_ylim(miny+dy, maxy+dy)


fig = plt.figure()
ax1 = fig.add_subplot(111)
ax2 = ax1.twinx()

ax1.bar(range(6), (2, -2, 1, 0, 0, 0))
ax2.plot(range(6), (0, 2, 8, -2, 0, 0))

align_yaxis(ax1, 0, ax2, 0)
plt.show()