1.首先把ubuntu shutdown. 2.在VMware里点击菜单VM——>Settings 3.在Hardware里面单击底下的Add按钮，然后选择Hard Disk——>Next——>Next——>Disk size(GB)是新增硬盘的大小——>Next——>Finish——>Ok. 这样在VMware的Devices里就多了一个Hard Disk 2。 三，接下来就是进入ubuntu，把新的硬盘mount进去了。 1. root@sparkle-desktop:~# fdisk -l Disk /dev/sda: 17.1 GB, 17179869184 bytes 255 heads, 63 sectors/track, 2088 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000af2a2 Device Boot Start End Blocks Id System /dev/sda1 * 1 993 7976241 83 Linux /dev/sda2 994 1044 409657+ 5 Extended /dev/sda5 994 1044 409626 82 Linux swap / Solaris Disk /dev/sdb: 8589 MB, 8589934592 bytes 255 heads, 63 sectors/track, 1044 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000000 Disk /dev/sdb doesn't contain a valid partition table 可以看到多了一个 /dev/sdb 2. 下面是格式化成ext3文件系统 root@sparkle-desktop:~# mkfs -t ext3 /dev/sdb mke2fs 1.40.8 (13-Mar-2008) /dev/sdb is entire device, not just one partition! Proceed anyway? (y,n) y //把整个新硬件格式化，不分区。 Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) 524288 inodes, 2097152 blocks 104857 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=2147483648 64 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632 Writing inode tables: done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 26 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. root@sparkle-desktop:~# 3. root@sparkle-desktop:~# cd /home root@sparkle-desktop:/home# mkdir work root@sparkle-desktop:/home# mount /dev/sdb work //把硬盘mount到work目录。 root@sparkle-desktop:/home# cd work root@sparkle-desktop:/home/work# ls lost+found 4. 用df命令查看一下挂载情况 root@sparkle-desktop:~# df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 7913216 7803524 0 100% / varrun 257788 240 257548 1% /var/run varlock 257788 0 257788 0% /var/lock udev 257788 48 257740 1% /dev devshm 257788 44 257744 1% /dev/shm lrm 257788 39760 218028 16% /lib/modules/2.6.24-19-generic/volatile /dev/sdb 8322488 149632 7753428 2% /home/work gvfs-fuse-daemon 7913216 7803524 0 100% /root/.gvfs 看到/dev/sdb 8322488 149632 7753428 2% /home/work 一项， 可见成功了。 5.实现启动自动挂载。 root@sparkle-desktop:~# gedit /etc/fstab 根据下面的格式 # <file system> <mount point> <type> <options> <dump> <pass> 我们自己添加： /dev/sdb /home/work ext3 defaults 0 0 相关文章： 2021-08-13 2021-08-29 2021-11-01 2021-12-25 2021-11-21 2021-12-10 2021-08-12