zt-zou

这是 MIT 6.824 课程 lab1 的学习总结,记录我在学习过程中的收获和踩的坑。

我的实验环境是 windows 10,所以对lab的code 做了一些环境上的修改,如果你仅仅对code 感兴趣,请移步 : github/zouzhitao

mapreduce overview

先大致看一下 mapreduce 到底是什么

我个人的简单理解是这样的: mapreduce 就是一种分布式处理用户特定任务的系统。它大概是这样处理的。

用户提供两个函数

mapFunc(k1,v1)-> list(k2,v2)
reduceFunc(k2,list(v2)) -> ans of k2

这个 分布式系统 将用户的任务做分布式处理,最终为每一个 k2 生成答案。下面我们就来描述一下,这个分布式系统是如何处理的。

首先,他有一个 master 来做任务调度。

master

  1. 先调度 worker 做 map 任务,设总的 map 任务的数目为 $M$ , 将result 存储在 中间文件 m-i-j 中, $i \in {0,\dots ,M-1}, j \in {0,\dots,R-1}$
  2. 调度 worker 做 reduce 任务,设总的 reduce 任务数目为 $R$, 将答案储存在 $r_j$
  3. 然后将所有的renduce 任务的ans merge起来作为答案放在一个文件中交给用户。

detail 都在实验中

detail

这部分讲 实验内容(观看code), 不过不按照 lab 顺序将。个人认为 做lab的目的,不是做lab 而是为了搞懂 mapreduce system

master

我们先来看看 master 这部分的代码

// Master holds all the state that the master needs to keep track of.
type Master struct {
	sync.Mutex

	address     string
	doneChannel chan bool

	// protected by the mutex
	newCond *sync.Cond // signals when Register() adds to workers[]
	workers []string   // each worker\'s UNIX-domain socket name -- its RPC address

	// Per-task information
	jobName string   // Name of currently executing job
	files   []string // Input files
	nReduce int      // Number of reduce partitions

	shutdown chan struct{}
	l        net.Listener
	stats    []int
}

master 维护了执行一个 job 需要的所有状态

master.run

这部分是 master 具体做的事情

// Distributed schedules map and reduce tasks on workers that register with the
// master over RPC.
func Distributed(jobName string, files []string, nreduce int, master string) (mr *Master) {
	mr = newMaster(master)
	mr.startRPCServer()
	go mr.run(jobName, files, nreduce,
		func(phase jobPhase) {
			ch := make(chan string) // worker 的地址
			go mr.forwardRegistrations(ch)
			schedule(mr.jobName, mr.files, mr.nReduce, phase, ch)
		},
		func() {
			mr.stats = mr.killWorkers()
			mr.stopRPCServer()
		})
	return
}

// run executes a mapreduce job on the given number of mappers and reducers.
//
// First, it divides up the input file among the given number of mappers, and
// schedules each task on workers as they become available. Each map task bins
// its output in a number of bins equal to the given number of reduce tasks.
// Once all the mappers have finished, workers are assigned reduce tasks.
//
// When all tasks have been completed, the reducer outputs are merged,
// statistics are collected, and the master is shut down.
//
// Note that this implementation assumes a shared file system.
func (mr *Master) run(jobName string, files []string, nreduce int,
	schedule func(phase jobPhase),
	finish func(),
) {
	mr.jobName = jobName
	mr.files = files
	mr.nReduce = nreduce

	fmt.Printf("%s: Starting Map/Reduce task %s\n", mr.address, mr.jobName)

	schedule(mapPhase)
	schedule(reducePhase)
	finish()
	mr.merge()

	fmt.Printf("%s: Map/Reduce task completed\n", mr.address)

	mr.doneChannel <- true
}

schedule

我们需要实现的其实是这个 schedule 也是最核心的, schedule 实现任务调度,注意这里有 $M$ 个 map 任务,$R$ 个 reduce 任务,只有 $n$ 个 worker, 通常情况下,$M>n,R>n$ 这样才能尽可能利用 worker 的性能,让流水线充沛。

//
// schedule() starts and waits for all tasks in the given phase (mapPhase
// or reducePhase). the mapFiles argument holds the names of the files that
// are the inputs to the map phase, one per map task. nReduce is the
// number of reduce tasks. the registerChan argument yields a stream
// of registered workers; each item is the worker\'s RPC address,
// suitable for passing to call(). registerChan will yield all
// existing registered workers (if any) and new ones as they register.
//
func schedule(jobName string, mapFiles []string, nReduce int, phase jobPhase, registerChan chan string) {
	var ntasks int
	var nOther int // number of inputs (for reduce) or outputs (for map)
	switch phase {
	case mapPhase:
		ntasks = len(mapFiles)
		nOther = nReduce
	case reducePhase:
		ntasks = nReduce
		nOther = len(mapFiles)
	}

	fmt.Printf("Schedule: %v %v tasks (%d I/Os)\n", ntasks, phase, nOther)

	// All ntasks tasks have to be scheduled on workers. Once all tasks
	// have completed successfully, schedule() should return.
	//
	// Your code here (Part III, Part IV).
	//

	//Part III

	var wg sync.WaitGroup
	wg.Add(ntasks)
	for i := 0; i < ntasks; i++ {
		go func(i int) {
			defer wg.Done()
			filename := ""
			if i <= len(mapFiles) {
				filename = mapFiles[i]
			}
			taskArgs := DoTaskArgs{
				JobName:       jobName,
				File:          filename,
				Phase:         phase,
				TaskNumber:    i,
				NumOtherPhase: nOther,
			}

			taskFinished := false

			for taskFinished == false {
				workAddr := <-registerChan
				taskFinished = call(workAddr, "Worker.DoTask", taskArgs, nil)
				go func() { registerChan <- workAddr }()
			}
		}(i)

	}
	wg.Wait()
	fmt.Printf("Schedule: %v done\n", phase)
}

schedule 要做的事情就是对于每一个任务,调用 call 函数去执行 一个rpc调用,让 worker 执行 Worker.DoTask 这是 PART III/IV 的代码。

这里注意几点细节

  1. registerChan 用的是管道,传输可用worker 的地址,所以 执行完一个 task之后要将 worker 的地址重新放到 registerChan
  2. master 是串行调度的,也就是说他要等待所有 map 任务做完,才会调度 reduce 任务,所以在schedule 里不能提前返回,要等待 说有task完成

接下来我们来看看这个 call 到底干了什么,其实它调用了 worker.DOTASK, 所以我们简单看看 worker.Dotask 干了什么就好

worker

// DoTask is called by the master when a new task is being scheduled on this
// worker.
func (wk *Worker) DoTask(arg *DoTaskArgs, _ *struct{}) error {
	//...
	switch arg.Phase {
	case mapPhase:
		doMap(arg.JobName, arg.TaskNumber, arg.File, arg.NumOtherPhase, wk.Map)
	case reducePhase:
		doReduce(arg.JobName, arg.TaskNumber, mergeName(arg.JobName, arg.TaskNumber), arg.NumOtherPhase, wk.Reduce)
	}
	//....
}

它核心就是调用了 doMapdoReduce

这也是 PART 1 的类容,我们来看看 doMapdoReduce 做了什么

doMap

func doMap(
	jobName string, // the name of the MapReduce job
	mapTask int, // which map task this is
	inFile string,
	nReduce int, // the number of reduce task that will be run ("R" in the paper)
	mapF func(filename string, contents string) []KeyValue,
) {
	//
	// doMap manages one map task: it should read one of the input files
	// (inFile), call the user-defined map function (mapF) for that file\'s
	// contents, and partition mapF\'s output into nReduce intermediate files.
	//
	// There is one intermediate file per reduce task. The file name
	// includes both the map task number and the reduce task number. Use
	// the filename generated by reduceName(jobName, mapTask, r)
	// as the intermediate file for reduce task r. Call ihash() (see
	// below) on each key, mod nReduce, to pick r for a key/value pair.
	//
	// mapF() is the map function provided by the application. The first
	// argument should be the input file name, though the map function
	// typically ignores it. The second argument should be the entire
	// input file contents. mapF() returns a slice containing the
	// key/value pairs for reduce; see common.go for the definition of
	// KeyValue.
	//
	// Look at Go\'s ioutil and os packages for functions to read
	// and write files.
	//
	// Coming up with a scheme for how to format the key/value pairs on
	// disk can be tricky, especially when taking into account that both
	// keys and values could contain newlines, quotes, and any other
	// character you can think of.
	//
	// One format often used for serializing data to a byte stream that the
	// other end can correctly reconstruct is JSON. You are not required to
	// use JSON, but as the output of the reduce tasks *must* be JSON,
	// familiarizing yourself with it here may prove useful. You can write
	// out a data structure as a JSON string to a file using the commented
	// code below. The corresponding decoding functions can be found in
	// common_reduce.go.
	//
	//   enc := json.NewEncoder(file)
	//   for _, kv := ... {
	//     err := enc.Encode(&kv)
	//
	// Remember to close the file after you have written all the values!
	//
	// Your code here (Part I).
	//

	content := safeReadFile(inFile)
	ans := mapF(inFile, string(content))
	jsonEncoder := make([]*json.Encoder, nReduce)

	for i := 0; i < nReduce; i++ {
		f := safeCreaFile(reduceName(jobName, mapTask, i))
		jsonEncoder[i] = json.NewEncoder(f)
		defer f.Close()
	}
	for _, kv := range ans {
		r := ihash(kv.Key) % nReduce
		err := jsonEncoder[r].Encode(&kv)
		if err != nil {
			log.Fatal("jsonEncode err", err)
		}
	}
}

  1. 读取文件内容
  2. 调用用户的 mapF 生成一系列的 key/val 将所有的 key/val list 以key hash 到每个 reduce 文件中
    也就是说,每个 map 任务产生 $nReduce$ 个中间文件,因此总共有 MxR 个中间文件产生,同时 由于 是以key hash 到reduce 任务的,可以保证同样的 key 一定到同一个 reduce

reduce

func doReduce(
	jobName string, // the name of the whole MapReduce job
	reduceTask int, // which reduce task this is
	outFile string, // write the output here
	nMap int, // the number of map tasks that were run ("M" in the paper)
	reduceF func(key string, values []string) string,
) {
	//
	// doReduce manages one reduce task: it should read the intermediate
	// files for the task, sort the intermediate key/value pairs by key,
	// call the user-defined reduce function (reduceF) for each key, and
	// write reduceF\'s output to disk.
	//
	// You\'ll need to read one intermediate file from each map task;
	// reduceName(jobName, m, reduceTask) yields the file
	// name from map task m.
	//
	// Your doMap() encoded the key/value pairs in the intermediate
	// files, so you will need to decode them. If you used JSON, you can
	// read and decode by creating a decoder and repeatedly calling
	// .Decode(&kv) on it until it returns an error.
	//
	// You may find the first example in the golang sort package
	// documentation useful.
	//
	// reduceF() is the application\'s reduce function. You should
	// call it once per distinct key, with a slice of all the values
	// for that key. reduceF() returns the reduced value for that key.
	//
	// You should write the reduce output as JSON encoded KeyValue
	// objects to the file named outFile. We require you to use JSON
	// because that is what the merger than combines the output
	// from all the reduce tasks expects. There is nothing special about
	// JSON -- it is just the marshalling format we chose to use. Your
	// output code will look something like this:
	//
	// enc := json.NewEncoder(file)
	// for key := ... {
	// 	enc.Encode(KeyValue{key, reduceF(...)})
	// }
	// file.Close()
	//
	// Your code here (Part I).
	//

	kvs := make(map[string][]string)
	for i := 0; i < nMap; i++ {
		kv := jsonDecode(reduceName(jobName, i, reduceTask))
		for _, v := range kv {
			kvs[v.Key] = append(kvs[v.Key], v.Value)
		}
	}
	f := safeCreaFile(outFile)
	defer f.Close()
	enc := json.NewEncoder(f)
	for k, v := range kvs {
		reduceAns := reduceF(k, v)
		enc.Encode(KeyValue{k, reduceAns})
	}
}

reduce 干的事情也很简单,它先读取所有传给它的任务。做成一个 list of key/val

然后调用用户的 reduceF。将答案传给用json 编码到一个文件

PART I 完。

接下来是两个实例

example

这里的两个例子是 word count 和倒排索引 invert index

word count

这个任务,是统计每个单词出现的次数

//
// The map function is called once for each file of input. The first
// argument is the name of the input file, and the second is the
// file\'s complete contents. You should ignore the input file name,
// and look only at the contents argument. The return value is a slice
// of key/value pairs.
//
func mapF(filename string, contents string) []mapreduce.KeyValue {
	// Your code here (Part II).
	var ret []mapreduce.KeyValue
	words := strings.FieldsFunc(contents, func(x rune) bool {
		return unicode.IsLetter(x) == false
	})
	for _, w := range words {
		kv := mapreduce.KeyValue{w, ""}
		ret = append(ret, kv)
	}
	return ret
}

//
// The reduce function is called once for each key generated by the
// map tasks, with a list of all the values created for that key by
// any map task.
//
func reduceF(key string, values []string) string {
	// Your code here (Part II).
	return strconv.Itoa(len(values))
}

part II 完

这里有一点要注意, test 用的是 diff,这个比对会将 \n,\n\r 认成不一样的,注意将ans 中的东西改成 \n 就好。

invert index

// The mapping function is called once for each piece of the input.
// In this framework, the key is the name of the file that is being processed,
// and the value is the file\'s contents. The return value should be a slice of
// key/value pairs, each represented by a mapreduce.KeyValue.
func mapF(document string, value string) (res []mapreduce.KeyValue) {
	// Your code here (Part V).
	words := strings.FieldsFunc(value, func(x rune) bool {
		return unicode.IsLetter(x) == false
	})
	kvmap := make(map[string]string)
	for _, w := range words {
		kvmap[w] = document
	}
	for k, v := range kvmap {
		res = append(res, mapreduce.KeyValue{k, v})
	}
	return
}

// The reduce function is called once for each key generated by Map, with a
// list of that key\'s string value (merged across all inputs). The return value
// should be a single output value for that key.
func reduceF(key string, values []string) string {
	// Your code here (Part V).
	numberOfDoc := len(values)
	sort.Strings(values)
	res := strconv.Itoa(numberOfDoc) + " " + strings.Join(values, ",")

	return res
}

这个地方要注意将同一个文档中的重复单词去除掉,用一个 map 储存一下就好

最后说一下环境的坑点

windows 环境注意事项

  1. lab 中注册用的unix 文件地址不能用,我将其改成了 tcp
  2. 注意改成 tcp 后,worker在 shutdown 的时候 close 掉tcp链接

reference

  1. google mapreduce paper
  2. lab1
  3. github/zouzhitao code repo

版权声明

本作品为作者原创文章,采用知识共享署名-非商业性使用-相同方式共享 4.0 国际许可协议

作者: taotao

转载请保留此版权声明,并注明出处

分类:

技术点:

相关文章: