zixuanfy

小白日记7:kali渗透测试之主动信息收集-发现(一)--二层发现:arping/shell脚本,Netdiscover,scapy

主动信息收集

被动信息收集可能不准确,可以用主动信息收集验证
 
特点:直接与目标系统交互通信,无法避免留下访问痕迹
解决方法:1、使用受控的第三方电脑进行探测,使用代理 (做好被封杀的准备)
 
  2、伪造大量的来源IP进行探测,进行噪声迷惑,淹没真是的探测流量
 
扫描流程:发送不同的探测,根据返回结果判断目标状态【IP层->端口层->服务层】
 

发现

识别活着的主机,发现潜在的被攻击目标,输出结果为IP地址列表。
 
二层发现
数据电路层,使用ARP协议
使用场景:已经取得一台主机,进入内网,对内网进行渗透
优点:扫描速度快,可靠
缺点:不可路由,只能扫同网段
掌握更多工具,以适应不同环境
 
1、arping
root@kali:~# arping 192.168.1.1 -c 1           #-c 指定发包数量
ARPING 192.168.1.1
60 bytes from 1c:bd:b9:27:d5:32 (192.168.1.1): index=0 time=16.324 msec
root@kali:~# arping 192.168.1.1 -d             #发现重复响应,可发现ARP欺骗(若发现不同的mac地址)
ARPING 192.168.1.1
60 bytes from 1c:bd:b9:27:d5:32 (192.168.1.1): index=0 time=3.071 msec
60 bytes from 1c:bd:b9:27:d5:32 (192.168.1.1): index=1 time=2.312 msec
60 bytes from 1c:bd:b9:27:d5:32 (192.168.1.1): index=2 time=3.019 msec

--- 192.168.1.1 statistics ---
3 packets transmitted, 3 packets received,   0% unanswered (0 extra)
rtt min/avg/max/std-dev = 2.312/2.801/3.071/0.346 ms<span style="font-weight: bold;">
</span>
通过grep筛选
root@kali:~# arping -c 1 192.168.1.1 | grep "bytes from" | cut -d" " -f 5 | cut -d "(" -f 2 | cut -d")" -f 1
192.168.1.1
root@kali:~# arping -c 1 192.168.1.1 | grep "bytes from"
60 bytes from 1c:bd:b9:27:d5:32 (192.168.1.1): index=0 time=12.441 msec<span style="font-weight: bold;">
</span>
 

shell脚本

#!/bin/bash
if [ "$#" -ne 1 ];then       #-ne 1 参数不等于为1
  echo "Usage - ./arping.sh [interface]"
  echo "Excample - ./arping.sh eth0"
  echo "Example will perform an ARP scan of the local subnet to which eth0 is assigned"
  exit
fi

interface=$1             #输入的一个值,,赋值给interface变量
prefix=$(ifconfig $interface | grep "inet " | cut -d \'t\' -f 2 | cut -d \'.\' -f 1-3)                <pre name="code" class="plain">               #取IP地址的前缀,如:192.168.1
               #grep "inet "这行; -d \'t\' 以t为分隔符  -f 选择其第2个字段

arping扫描一个IP范围

for addr in $(seq 1 254);do arping -c 1 $prefix.$addr | grep "bytes from" | cut -d" " -f 5 | cut -d "(" -f 2 | cut -d")" -f 1 >>add.txt

                                              #>>输出到一个文本文件
done
从文本文件中读取IP地址进行扫描

 

#!/bin/bash
if [ "$#" -ne 1 ];then
  echo "Usage - ./arping.sh [interface]"
  echo "Excample - ./arping.sh file"
  echo "Example will perform an ARP scan of the local subnet to which eth0 is assigned"
  exit
fi
file=$1
for addr in $(cat $file);do
   arping -c 1 $addr | grep "bytes from" | cut -d" " -f 5 | cut -d "(" -f 2 | cut -d")" -f 1
done

nmap

做二层发现  #速度快而准,内容相对丰富,可以做IP段扫描,不用写脚本

root@kali:~# nmap -sn 192.168.1.0/24     <strong>#-sn 不做端口扫描,不仅仅发arp包,还会做ptr记录解析(反向域名解析)</strong>

Starting Nmap 7.01 ( https://nmap.org ) at 2016-09-10 12:40 CST
Nmap scan report for DD-WRT (192.168.1.1)
Host is up (0.0024s latency).
MAC Address: 1C:BD:B9:27:D5:32 (D-Link International)          #mac厂家
Nmap scan report for HUAWEIG750-T01-HWG75 (192.168.1.105)
Host is up (0.083s latency).
MAC Address: 9C:C1:72:13:6A:61 (Huawei Technologies)
Nmap scan report for DESKTOP-TA5DCRJ (192.168.1.141)
Host is up (0.00069s latency).
MAC Address: 2C:6E:85:C4:0D:5B (Intel Corporate)
Nmap scan report for kali (192.168.1.143)
Host is up (0.00053s latency).
MAC Address: 08:00:27:CA:63:99 (Oracle VirtualBox virtual NIC)
Nmap scan report for Meizu-MX4-Pro (192.168.1.146)
Host is up (0.24s latency).
MAC Address: 38:BC:1A:E8:85:ED (Meizu technology)
Nmap scan report for 192.168.1.127
Host is up.
Nmap done: 256 IP addresses (6 hosts up) scanned in 4.06 seconds

指定文件扫描  #-iL
root@kali:~# nmap -iL arp.txt -sn

Starting Nmap 7.01 ( https://nmap.org ) at 2016-09-10 12:44 CST
Nmap scan report for DD-WRT (192.168.1.1)
Host is up (0.011s latency).
MAC Address: 1C:BD:B9:27:D5:32 (D-Link International)
Nmap scan report for DESKTOP-TA5DCRJ (192.168.1.141)
Host is up (0.00028s latency).
MAC Address: 2C:6E:85:C4:0D:5B (Intel Corporate)
Nmap scan report for kali (192.168.1.143)
Host is up (0.00042s latency).
MAC Address: 08:00:27:CA:63:99 (Oracle VirtualBox virtual NIC)
Nmap scan report for Meizu-MX4-Pro (192.168.1.146)
Host is up (0.079s latency).
MAC Address: 38:BC:1A:E8:85:ED (Meizu technology)
Nmap scan report for DD-WRT (192.168.1.1)
Host is up (0.0036s latency).
MAC Address: 1C:BD:B9:27:D5:32 (D-Link International)
Nmap scan report for DESKTOP-TA5DCRJ (192.168.1.141)
Host is up (0.00022s latency).
MAC Address: 2C:6E:85:C4:0D:5B (Intel Corporate)
Nmap scan report for kali (192.168.1.143)
Host is up (0.00024s latency).
MAC Address: 08:00:27:CA:63:99 (Oracle VirtualBox virtual NIC)
Nmap done: 8 IP addresses (7 hosts up) scanned in 0.44 seconds

Netdiscover

专门用于二层发现的arp侦查工具,既可做主动扫描,也可以做被动式扫描。既可用于无线,也可做有线扫描。
主动式
netdiscover -i eth0 -r 1.1.1.0/24            #-i指定网卡
 
netdiscover -l iplist.txt   #指定文件
 
被动式
避免被发现,不主动发arp包,原理:使用混杂模式,收取非本网卡IP/MAC的数据包,基于广播,默默等待并记录。准确程度与主动无差,响应速度慢些(但网络中,主机发arp包的次数比较常见,时间不会太久)
 
netdiscover -p      #使用被动模式
 
 

Scapy   #极为强大

网友官方中文文档点击打开链接
 
Scapy 是一个强大的操纵报文的交互程序。它可以伪造或者解析多种协议的报文,还具有发送、捕获、匹配请求和响应这些报文以及更多的功能。Scapy 可以轻松地做到像扫描(scanning)、路由跟踪(tracerouting)、探测(probing)、单元测试(unit tests)、攻击(attacks)和发现网络(network discorvery)这样的传统任务。它可以代替hping,arpspoof,arp-sk,arping,p0f 甚至是部分的Namp,tcpdump和tshark 的功能。
优点:发送无效帧、添加自定义的802.11的侦、多技术的结合(跳跃攻击(VLAN hopping)+ARP缓存中毒(ARP cache poisoning)、在WEP加密信道(WEP encrypted channel)上的VOIP解码(VOIP decoding))等
若有缺失apt-get install python-gnuplot
root@kali:~# scapy
WARNING: No route found for IPv6 destination :: (no default route?)
Welcome to Scapy (2.3.2)
>>> ARP().display()                 <strong>    #函数名称必须大写,display()显示函数内容,调用ARP(),定制ARP包</strong>
###[ ARP ]###
  hwtype= 0x1             #硬件类型
  ptype= 0x800             #协议类型
  hwlen= 6                 #硬件地址长度
  plen= 4                   #协议长度
  op= who-has                  #操作码
  hwsrc= 08:00:27:92:17:df          #源mac
  psrc= 192.168.1.127             #源IP地址  
  hwdst= 00:00:00:00:00:00         #目标mac
  pdst= 0.0.0.0                   #目标IP
定制ARP包     #scapy发包,默认收不到回包,会一直等待,所以需加上timeout
>>> arp=ARP()                    #定义arp包
>>> arp.pdst="192.168.1.1"        #指定目标ip
>>> arp.display()
###[ ARP ]###
  hwtype= 0x1
  ptype= 0x800
  hwlen= 6
  plen= 4
  op= who-has
  hwsrc= 08:00:27:92:17:df
  psrc= 192.168.1.127
  hwdst= 00:00:00:00:00:00
  pdst= 192.168.1.1
>>> sr1(arp)
Begin emission:
*Finished to send 1 packets.

Received 1 packets, got 1 answers, remaining 0 packets
<ARP  hwtype=0x1 ptype=0x800 hwlen=6 plen=4 op=is-at hwsrc=1c:bd:b9:27:d5:32 psrc=192.168.1.1 hwdst=08:00:27:92:17:df pdst=192.168.1.127 |<Padding  load=\'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\' |>>
>>> answer=sr1(arp)           #定义一个变量answer
Begin emission:
*Finished to send 1 packets.

Received 1 packets, got 1 answers, remaining 0 packets
>>> answer.display()
###[ ARP ]###
  hwtype= 0x1
  ptype= 0x800
  hwlen= 6
  plen= 4
  op= is-at
  hwsrc= 1c:bd:b9:27:d5:32
  psrc= 192.168.1.1
  hwdst= 08:00:27:92:17:df
  pdst= 192.168.1.127
###[ Padding ]###                #数据包不足位,补码
     load= \'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\'

python脚本【shell脚本速度比scapy脚本略快,nmap最快】#默认发两个arp包,提高准确性
#!/usr/bin/python

import logging                    #导入库
import subprocess
logging.getLogger("scapy.runtime").setLevel(logging.ERROR)
from scapy.all import*              #导入scapy所有库                           

if len( sys.argv ) !=2:                               #命令参数不等于2
   print "Usage - ./arp_discpy [interface]"
   print "Example - ./arp_disc.py eth0"
   print "Example will perform an ARP scan of thr local subnet to which eth0 is assigned"
   sys.exit()

interface = str(sys.argv[1])

ip=subprocess.check_output("ifconfig "+interface+" | grep \'inet \' | cut -d \'t\' -f 2 |cut -d \' \' -f 2",shell=True).strip()
prefix = ip.split(".")[0] + \'.\' + ip.split(".")[1] + \'.\' + ip.split(".")[2] + \'.\'

for addr in range(0,254):
   answer=sr1(ARP(pdst=prefix+str(addr)),timeout=0.1,verbose=0)       #构造ARP包
   if answer ==None:
     pass;
   else:
     print prefix+str(addr)
指定文件扫描
#!/usr/bin/python

import logging
import subprocess
logging.getLogger("scapy.runtime").setLevel(logging.ERROR)
from scapy.all import*

if len( sys.argv ) !=2:                               
   print "Usage - ./arp_discpy [interface]"
   print "Example - ./arp_disc.py eth0"
   print "Example will perform an ARP scan of thr local subnet to which eth0 is assigned"
   sys.exit()

filename = str(sys.argv[1])
file = open(filename,"r")

for addr in file:
   answer=sr1(ARP(pdst=addr.strip()),timeout=0.1,verbose=0)
   if answer == None:
     pass
   else:
     print addr.strip()



小白日记,未完待续……

分类:

技术点:

相关文章: