6 BufferQueue

上一篇已经说到,BufferQueue是SurfaceFlinger管理和消费surface的中介,我们就开始分析bufferqueue。

每个应用 可以由几个BufferQueue?

应用绘制UI 所需的内存从何而来?

应用和SurfaceFlinger 如何互斥共享资源的访问?

6.1 Buffer的状态

android Gui系统之SurfaceFlinger(2)---BufferQueue

const char* BufferSlot::bufferStateName(BufferState state) {
    switch (state) {
        case BufferSlot::DEQUEUED: return "DEQUEUED";
        case BufferSlot::QUEUED: return "QUEUED";
        case BufferSlot::FREE: return "FREE";
        case BufferSlot::ACQUIRED: return "ACQUIRED";
        default: return "Unknown";
    }
}

android Gui系统之SurfaceFlinger(2)---BufferQueue

状态变迁如下:FREE->DEQUEUED->QUEUED->ACQUIRED->FREE

BufferQueue的状态迁移图:

android Gui系统之SurfaceFlinger(2)---BufferQueue

我们先来看,producer & comsumer 分别是什么?

应用程序需要刷新UI,所以就会产生surface到BufferQueue,so,producer 可以认为就是应用程序,也可以是上一篇里面介绍的ISurfaceComposerClient。

comsumer不用看也知道,就是SurfaceFlinger。所以可以明确一个大致的流程就是,

1)应用需要刷新UI,获取一个buffer的缓冲区,这个操作就是dequeue。经过dequeue以后,该buffer被producer锁定,其他Owner就不能插手了。

2)然后把surface写入到该buffer里面,当producer认为写入结束后,就执行queue的操作,把buffer 归还给bufferqueue。Owner也变成为bufferqueue。

3)当一段buffer里面由数据以后,comsumer就会收到消息,然后去获取该buffer。

android Gui系统之SurfaceFlinger(2)---BufferQueue

void BufferQueue::ProxyConsumerListener::onFrameAvailable(
        const android::BufferItem& item) {
    sp<ConsumerListener> listener(mConsumerListener.promote());
    if (listener != NULL) {
        listener->onFrameAvailable(item);
    }
}

android Gui系统之SurfaceFlinger(2)---BufferQueue

bufferqueue里面就是comsumerlistener,当有可以使用的buffer后,就会通知comsumer使用。

// mGraphicBuffer points to the buffer allocated for this slot or is NULL
    // if no buffer has been allocated.
    sp<GraphicBuffer> mGraphicBuffer;

可以看到注释,bufferqueue的mSlot[64],并不是都有内容的,也就是mSlot存的是buferr的指针,如果没有,就存null

slot的个数在andorid5.0 里面定义在BufferQueueDefs.h里面,

 enum { NUM_BUFFER_SLOTS = 64 };

 

6.2 Buffer内存的出处

既然producer是主动操作,所以如果在dequeue的时候,已经获取了内存,后面的操作也就不需要分配内存了。

android Gui系统之SurfaceFlinger(2)---BufferQueue

android Gui系统之SurfaceFlinger(2)---BufferQueue

status_t BufferQueueProducer::dequeueBuffer(int *outSlot,
        sp<android::Fence> *outFence, bool async,
        uint32_t width, uint32_t height, uint32_t format, uint32_t usage) {
    ATRACE_CALL();
    { // Autolock scope
        Mutex::Autolock lock(mCore->mMutex);
        mConsumerName = mCore->mConsumerName;
    } // Autolock scope

    BQ_LOGV("dequeueBuffer: async=%s w=%u h=%u format=%#x, usage=%#x",
            async ? "true" : "false", width, height, format, usage);

    if ((width && !height) || (!width && height)) {
        BQ_LOGE("dequeueBuffer: invalid size: w=%u h=%u", width, height);
        return BAD_VALUE;
    }

    status_t returnFlags = NO_ERROR;
    EGLDisplay eglDisplay = EGL_NO_DISPLAY;
    EGLSyncKHR eglFence = EGL_NO_SYNC_KHR;
    bool attachedByConsumer = false;

    { // Autolock scope
        Mutex::Autolock lock(mCore->mMutex);
        mCore->waitWhileAllocatingLocked();

        if (format == 0) {
            format = mCore->mDefaultBufferFormat;
        }

        // Enable the usage bits the consumer requested
        usage |= mCore->mConsumerUsageBits;

        int found;
        status_t status = waitForFreeSlotThenRelock("dequeueBuffer", async,
                &found, &returnFlags);
        if (status != NO_ERROR) {
            return status;
        }

        // This should not happen
        if (found == BufferQueueCore::INVALID_BUFFER_SLOT) {
            BQ_LOGE("dequeueBuffer: no available buffer slots");
            return -EBUSY;
        }

        *outSlot = found;
        ATRACE_BUFFER_INDEX(found);

        attachedByConsumer = mSlots[found].mAttachedByConsumer;

        const bool useDefaultSize = !width && !height;
        if (useDefaultSize) {
            width = mCore->mDefaultWidth;
            height = mCore->mDefaultHeight;
        }

        mSlots[found].mBufferState = BufferSlot::DEQUEUED;

        const sp<GraphicBuffer>& buffer(mSlots[found].mGraphicBuffer);
        if ((buffer == NULL) ||
                (static_cast<uint32_t>(buffer->width) != width) ||
                (static_cast<uint32_t>(buffer->height) != height) ||
                (static_cast<uint32_t>(buffer->format) != format) ||
                ((static_cast<uint32_t>(buffer->usage) & usage) != usage))
        {
            mSlots[found].mAcquireCalled = false;
            mSlots[found].mGraphicBuffer = NULL;
            mSlots[found].mRequestBufferCalled = false;
            mSlots[found].mEglDisplay = EGL_NO_DISPLAY;
            mSlots[found].mEglFence = EGL_NO_SYNC_KHR;
            mSlots[found].mFence = Fence::NO_FENCE;

            returnFlags |= BUFFER_NEEDS_REALLOCATION;
        }

        if (CC_UNLIKELY(mSlots[found].mFence == NULL)) {
            BQ_LOGE("dequeueBuffer: about to return a NULL fence - "
                    "slot=%d w=%d h=%d format=%u",
                    found, buffer->width, buffer->height, buffer->format);
        }

        eglDisplay = mSlots[found].mEglDisplay;
        eglFence = mSlots[found].mEglFence;
        *outFence = mSlots[found].mFence;
        mSlots[found].mEglFence = EGL_NO_SYNC_KHR;
        mSlots[found].mFence = Fence::NO_FENCE;
    } // Autolock scope

    if (returnFlags & BUFFER_NEEDS_REALLOCATION) {
        status_t error;
        BQ_LOGV("dequeueBuffer: allocating a new buffer for slot %d", *outSlot);
        sp<GraphicBuffer> graphicBuffer(mCore->mAllocator->createGraphicBuffer(
                    width, height, format, usage, &error));
        if (graphicBuffer == NULL) {
            BQ_LOGE("dequeueBuffer: createGraphicBuffer failed");
            return error;
        }

        { // Autolock scope
            Mutex::Autolock lock(mCore->mMutex);

            if (mCore->mIsAbandoned) {
                BQ_LOGE("dequeueBuffer: BufferQueue has been abandoned");
                return NO_INIT;
            }

            mSlots[*outSlot].mFrameNumber = UINT32_MAX;
            mSlots[*outSlot].mGraphicBuffer = graphicBuffer;
        } // Autolock scope
    }

    if (attachedByConsumer) {
        returnFlags |= BUFFER_NEEDS_REALLOCATION;
    }

    if (eglFence != EGL_NO_SYNC_KHR) {
        EGLint result = eglClientWaitSyncKHR(eglDisplay, eglFence, 0,
                1000000000);
        // If something goes wrong, log the error, but return the buffer without
        // synchronizing access to it. It's too late at this point to abort the
        // dequeue operation.
        if (result == EGL_FALSE) {
            BQ_LOGE("dequeueBuffer: error %#x waiting for fence",
                    eglGetError());
        } else if (result == EGL_TIMEOUT_EXPIRED_KHR) {
            BQ_LOGE("dequeueBuffer: timeout waiting for fence");
        }
        eglDestroySyncKHR(eglDisplay, eglFence);
    }

    BQ_LOGV("dequeueBuffer: returning slot=%d/%" PRIu64 " buf=%p flags=%#x",
            *outSlot,
            mSlots[*outSlot].mFrameNumber,
            mSlots[*outSlot].mGraphicBuffer->handle, returnFlags);

    return returnFlags;
}

android Gui系统之SurfaceFlinger(2)---BufferQueue

step1:BufferQueueProducer::waitForFreeSlotThenRelock 循环的主要作用就是查找可以使用的slot。

step2:释放不需要的buffer,并且统计已分配的内存。

android Gui系统之SurfaceFlinger(2)---BufferQueue

        // Free up any buffers that are in slots beyond the max buffer count
        for (int s = maxBufferCount; s < BufferQueueDefs::NUM_BUFFER_SLOTS; ++s) {
            assert(mSlots[s].mBufferState == BufferSlot::FREE);
            if (mSlots[s].mGraphicBuffer != NULL) {
                mCore->freeBufferLocked(s);
                *returnFlags |= RELEASE_ALL_BUFFERS;
            }
        }

android Gui系统之SurfaceFlinger(2)---BufferQueue

android Gui系统之SurfaceFlinger(2)---BufferQueue

for (int s = 0; s < maxBufferCount; ++s) {
            switch (mSlots[s].mBufferState) {
                case BufferSlot::DEQUEUED:
                    ++dequeuedCount;
                    break;
                case BufferSlot::ACQUIRED:
                    ++acquiredCount;
                    break;
                case BufferSlot::FREE:
                    // We return the oldest of the free buffers to avoid
                    // stalling the producer if possible, since the consumer
                    // may still have pending reads of in-flight buffers
                    if (*found == BufferQueueCore::INVALID_BUFFER_SLOT ||
                            mSlots[s].mFrameNumber < mSlots[*found].mFrameNumber) {
                        *found = s;
                    }
                    break;
                default:
                    break;
            }
        }

android Gui系统之SurfaceFlinger(2)---BufferQueue

如果有合适的,found 就是可以使用的buffer编号。

如果dequeue too many,but comsumer还来不及消耗掉,这个时候,有可能会导致OOM,所以,判断是否在队列里面有过多的buffer。

等待comsumer消耗后,释放互斥锁。

android Gui系统之SurfaceFlinger(2)---BufferQueue

        if (tryAgain) {
            // Return an error if we're in non-blocking mode (producer and
            // consumer are controlled by the application).
            // However, the consumer is allowed to briefly acquire an extra
            // buffer (which could cause us to have to wait here), which is
            // okay, since it is only used to implement an atomic acquire +
            // release (e.g., in GLConsumer::updateTexImage())
            if (mCore->mDequeueBufferCannotBlock &&
                    (acquiredCount <= mCore->mMaxAcquiredBufferCount)) {
                return WOULD_BLOCK;
            }
            mCore->mDequeueCondition.wait(mCore->mMutex);
        }

android Gui系统之SurfaceFlinger(2)---BufferQueue

 

在返回dqueueBuffer这个方法:如果没有找到free的slot,就直接返回错误。当然正常情况下是不会发生的。

        // This should not happen
        if (found == BufferQueueCore::INVALID_BUFFER_SLOT) {
            BQ_LOGE("dequeueBuffer: no available buffer slots");
            return -EBUSY;
        }
 mSlots[found].mBufferState = BufferSlot::DEQUEUED;

把找到的buffer的状态设为DEQUEUE。

在判断了mSlot[found]的属性以后,它可能是空的,也有可能不符合当前需要的buffer的size,就给mSlot[found]分配新的属性和内存

android Gui系统之SurfaceFlinger(2)---BufferQueue

if ((buffer == NULL) ||
                (static_cast<uint32_t>(buffer->width) != width) ||
                (static_cast<uint32_t>(buffer->height) != height) ||
                (static_cast<uint32_t>(buffer->format) != format) ||
                ((static_cast<uint32_t>(buffer->usage) & usage) != usage))
        {
            mSlots[found].mAcquireCalled = false;
            mSlots[found].mGraphicBuffer = NULL;
            mSlots[found].mRequestBufferCalled = false;
            mSlots[found].mEglDisplay = EGL_NO_DISPLAY;
            mSlots[found].mEglFence = EGL_NO_SYNC_KHR;
            mSlots[found].mFence = Fence::NO_FENCE;

            returnFlags |= BUFFER_NEEDS_REALLOCATION;
        }

        if (CC_UNLIKELY(mSlots[found].mFence == NULL)) {
            BQ_LOGE("dequeueBuffer: about to return a NULL fence - "
                    "slot=%d w=%d h=%d format=%u",
                    found, buffer->width, buffer->height, buffer->format);
        }

        eglDisplay = mSlots[found].mEglDisplay;
        eglFence = mSlots[found].mEglFence;
        *outFence = mSlots[found].mFence;
        mSlots[found].mEglFence = EGL_NO_SYNC_KHR;
        mSlots[found].mFence = Fence::NO_FENCE;
    } // Autolock scope

    if (returnFlags & BUFFER_NEEDS_REALLOCATION) {
        status_t error;
        BQ_LOGV("dequeueBuffer: allocating a new buffer for slot %d", *outSlot);
        sp<GraphicBuffer> graphicBuffer(mCore->mAllocator->createGraphicBuffer(
                    width, height, format, usage, &error));
        if (graphicBuffer == NULL) {
            BQ_LOGE("dequeueBuffer: createGraphicBuffer failed");
            return error;
        }

        { // Autolock scope
            Mutex::Autolock lock(mCore->mMutex);

            if (mCore->mIsAbandoned) {
                BQ_LOGE("dequeueBuffer: BufferQueue has been abandoned");
                return NO_INIT;
            }

            mSlots[*outSlot].mFrameNumber = UINT32_MAX;
            mSlots[*outSlot].mGraphicBuffer = graphicBuffer;
        } // Autolock scope
    }

android Gui系统之SurfaceFlinger(2)---BufferQueue

这样buffer对应的内存就是在producer,dequeue操作的时候分配内存的。(if need)

6.3应用程序和BufferQueue的关系

首先看一张surface各类之间的关系:

android Gui系统之SurfaceFlinger(2)---BufferQueue

 这里多了一个Layer的东西,Layer代表一个画面的图层(在android app的角度以前是没有图层的概念的,虽然framework有)。

SurfaceFlinger混合,就是把所有的layer做混合。

我们先来看createlayer:

status_t SurfaceFlinger::createLayer(
        const String8& name,
        const sp<Client>& client,
        uint32_t w, uint32_t h, PixelFormat format, uint32_t flags,
        sp<IBinder>* handle, sp<IGraphicBufferProducer>* gbp)

这里关键是handler & gbp这2个参数。

我们看下去代码:layer 是从createNormalLayer里面来的

android Gui系统之SurfaceFlinger(2)---BufferQueue

status_t SurfaceFlinger::createNormalLayer(const sp<Client>& client,
        const String8& name, uint32_t w, uint32_t h, uint32_t flags, PixelFormat& format,
        sp<IBinder>* handle, sp<IGraphicBufferProducer>* gbp, sp<Layer>* outLayer)
{
    // initialize the surfaces
    switch (format) {
    case PIXEL_FORMAT_TRANSPARENT:
    case PIXEL_FORMAT_TRANSLUCENT:
        format = PIXEL_FORMAT_RGBA_8888;
        break;
    case PIXEL_FORMAT_OPAQUE:
        format = PIXEL_FORMAT_RGBX_8888;
        break;
    }

    *outLayer = new Layer(this, client, name, w, h, flags);
    status_t err = (*outLayer)->setBuffers(w, h, format, flags);
    if (err == NO_ERROR) {
        *handle = (*outLayer)->getHandle();
        *gbp = (*outLayer)->getProducer();
    }

    ALOGE_IF(err, "createNormalLayer() failed (%s)", strerror(-err));
    return err;
}

android Gui系统之SurfaceFlinger(2)---BufferQueue

producer跟踪源代码可以看到:

class MonitoredProducer : public IGraphicBufferProducer 

通过bind机制,可以认为就是BufferQueue的一个子类。

所以,每一个bufferqueue对应的都是一个layer。

看下handler:

android Gui系统之SurfaceFlinger(2)---BufferQueue

sp<IBinder> Layer::getHandle() {
    Mutex::Autolock _l(mLock);

    LOG_ALWAYS_FATAL_IF(mHasSurface,
            "Layer::getHandle() has already been called");

    mHasSurface = true;

    /*
     * The layer handle is just a BBinder object passed to the client
     * (remote process) -- we don't keep any reference on our side such that
     * the dtor is called when the remote side let go of its reference.
     *
     * LayerCleaner ensures that mFlinger->onLayerDestroyed() is called for
     * this layer when the handle is destroyed.
     */

    class Handle : public BBinder, public LayerCleaner {
        wp<const Layer> mOwner;
    public:
        Handle(const sp<SurfaceFlinger>& flinger, const sp<Layer>& layer)
            : LayerCleaner(flinger, layer), mOwner(layer) {
        }
    };

    return new Handle(mFlinger, this);
}

android Gui系统之SurfaceFlinger(2)---BufferQueue

没有什么东西,就是LayerCleaner,

它的设计目的就是SurfaceFlinger来清除图层。

所以我们可以得出结论

1)一个app对应一个surfaceFlinger,可以有多个layer,从而对应多个bufferqueue

2)surface的缓冲区内存是BufferQueue在进行dequeue的时候分配的,属于client端。

3)App & SurfaceFlinger都通过bufferQueue来分配和使用缓冲区,所以互斥操作是由BufferQueue来实现。

参考:

《深入理解android内核设计思想》 林学森

 

 

 

 

 

 

 

 

分类:

技术点:

相关文章: